Help with a fault My account Nederlands

Load balancing across charger makes

Load balancing shares the power between the cars that are charging. It is an add-on to your back office for chargers that support OCPP 1.6 with charging profiles. The Crailo charging hub has worked this way since March 2026.

  • Mixed makes
  • With or without a meter
  • Four safety layers

8 charge points on 80 A, three cars charging

Example

Fixed split10 A per charge point

30 A of 80 A in use

With WIM Load Managementspare power goes to the cars that are charging

80 A of 80 A in use

Together, the chargers stay within the 80 A limit of the connection.

See it at Crailo.

A public charging hub in ’t Gooi, with more than twenty charge points on twelve dual-socket chargers; load balancing on eight chargers, split over two 80 A connections.

Read the case study

Connections
2 × 80 A
Chargers with load balancing
8 of 12
Live since
March 2026

Cars that are charging get the power.

Our software controls each charger individually via OCPP, over 4G or a network cable.

  1. 1

    Who is charging?

    Every charger reports its status. A charger that is not drawing power is left out.

  2. 2

    Share

    Each car that is charging gets a share of the power, up to 32 A.

  3. 3

    Send

    Each charger receives its own charging profile, updated continuously.

  4. 4

    Repeat

    When a car arrives or leaves, we recalculate straight away.

A meter in the meter cupboard is optional.

Without a meter, the chargers get a fixed share of your connection. With a meter module on your main connection, they get whatever capacity your building is not using at that moment.

Fixed budgetFollowing your building’s load
What it doesA fixed number of amps for the chargers, shared between the cars that are chargingThe chargers get whatever capacity your building is not using at that moment
Meter neededNoYes, a meter module with CT clamps on your main connection
Available from WIMYes, this is how the Crailo charging hub worksYes

During the intake we work out which of the two suits your connection.

Four stacked safety nets.

If the data connection drops, every charger falls back to a safe base profile. The car keeps charging, only more slowly. The last layer is the fuse itself.

  1. 1

    Short-lived dynamic profile

    up to 32 A per car, expires after 5 minutes

    The extra capacity WIM allocates is only valid for a few minutes. If the internet or the connection to the charger drops, the profile expires on its own.

  2. 2

    Fixed base profile on every charger

    set permanently, no expiry

    Underneath is a fixed profile. If WIM drops out, every car keeps charging on its base profile, and the base profiles together fit within your connection.

  3. 3

    Limit in the charger itself

    set in the charger

    Each charger enforces its own maximum, independently of our software.

  4. 4

    The fuse on your connection

    the physical limit

    The fuse works independently of the software.

Which chargers are compatible?

Chargers that support OCPP 1.6 with charging profiles, including a mix of makes. Examples are Alfen (AC and DC), go-e, Easee, Ekoenergetyka, Vestel and Alpitronic. They must be online and follow the charging profiles correctly. Zaptec works with our charger management, but not with load balancing.

Is my charger suitable? Load balancing or a bigger connection?

What we check during the intake

  • Make, model and firmware of every charger
  • Whether the charger follows charging profiles correctly
  • The size of your connection and what else is on it
  • How the chargers on your premises are connected

If it will not work for your site, we will tell you.

€2.50 per charge point per month.

A minimum of €25 per location, plus a one-off €149 for the intake, testing and setup. Charged on top of WIM Management, excl. VAT.

Charge pointsPer monthOne-off
4 €25 (minimum) €149
8 €25 (minimum) €149
16 €40 €149

Prices for load balancing without a meter, at one location. With a meter module, we quote the price during the intake. Prices for WIM Management itself are on the pricing page.

Questions about load balancing.

How do I add more chargers if my grid connection is too small?

With load balancing. You set how many amps the chargers can use in total, and WIM shares them between the cars that are charging. An empty charge point holds nothing back, so more charge points fit on the same connection.

Does a car charge more slowly with load balancing?

Only when all charge points are in use at once. They then share the connection between them. When a charge point is empty, its power goes to the cars that are charging.

Why not just upgrade my grid connection?

In large parts of the Netherlands the grid is full. Above 3×80 A you count as a large consumer, and in areas with grid congestion you go on a waiting list. Some waiting lists are closed; others take years. So first see what load balancing can fit within your existing connection.

Do I need to buy new chargers?

Usually not. Your chargers must support OCPP 1.6 with charging profiles, be online and follow those profiles correctly. We test this during the intake, for each make and firmware version. Zaptec chargers cannot be included in load balancing.

Can I keep power in reserve for the rest of my building?

Yes. Without a meter, we set a total limit in amps for the chargers during the intake, and the rest stays available for your building. With a meter module on your main connection, the chargers adjust to what your building is using at that moment.

How many charge points fit on your connection?

The number of charge points, the makes and the size of your connection: that is what we need to work it out.

Request an intake