Help with a fault My account Nederlands

For charging companies

See what is going on in your charging network.

For charging companies with their own network: the software WIM itself uses every day. Faults, sessions and non-standard settings in one place, self-help for your drivers via a QR sticker, and power sharing across makes.

Fleet OpsExample, fictitious data
Charger Make Status Fault Score
Location A, charger 1 Make A Charging 97
Location A, charger 2 Make A Available 94
Location A, charger 3 Make B Available Smart meter (P1) link lost 88
Location B, charger 1 Make C Fault Power switch fault 41
Location B, charger 2 Make B Offline Non-standard setting 63

Three modules, each with its own job.

All three are available for a pilot. We are looking for charging companies that want to work with us on one or more of them.

Fleet Ops

See the state of your charging network. Find recurring faults and non-standard settings by make and firmware, with the information you need to investigate in the right place.

QR self-help and payment

With the QR sticker on the charger, drivers can help themselves: unlock the cable, restart the charger or report a specific problem. If the charge point is open to visitors, they can also pay without a charge card.

Load Management

Share the available capacity in real time between active charge points, across makes, via OCPP, with four safety layers down to the fuse itself.

How a pilot works.

  1. 1

    Introduction

    We talk about your network, your back office and the problems you are currently running into.

  2. 2

    Connect

    Together we choose part of your network and connect the module that will make the most difference.

  3. 3

    Review

    Together we look at the results, then discuss whether and how you want to continue.

Discuss a pilot for your network.

Use the form to tell us how big your network is and which back office you use.

Request an intake