All chargers in one place.
Also when makes are mixed.
Fleet Ops is the software WIM uses to watch your chargers remotely. Every charger gets a score, and a fault code shows up in plain words, not as the bare label the charger sends.
| Charger | Make | Status | Fault | Score |
|---|---|---|---|---|
| Location A, charger 1 | Make A | Charging | 97 | |
| Location A, charger 2 | Make A | Available | 94 | |
| Location A, charger 3 | Make B | Available | Smart meter (P1) link lost | 88 |
| Location B, charger 1 | Make C | Fault | Power switch fault | 41 |
| Location B, charger 2 | Make B | Offline | Non-standard setting | 63 |
Also when makes are mixed.
Charging, available, online or not.
The manufacturer's code in plain words, not just the raw OCPP label.
A charger set up differently from the rest, and the firmware it runs.
Per charger.
We mute known noise patterns, so a real problem stands out.
A charger reports a fault with a label from the OCPP standard and a code from the manufacturer. That tells you little. Fleet Ops turns the codes we know into what is going on.
A short label and a code from the manufacturer.
What is going on, for example: connection to the smart meter (P1) lost.
A fault that keeps coming back weighs more in the score than one that shows up once.
One number that says how a charger is doing. It is built from what we measure on a charger, such as:
Location A, charger 3 · score 88
Three roles, in this order. We do not make site visits.
Per problem: who do you need?Unlock the cable, restart the charger or report a problem.
How QR self-help worksWe see the fault and the report, with the right charge point attached. What can be fixed remotely, we fix.
A repair on site is done by your own installer. You get the fault codes and what they mean from us.
Fleet Ops is built in-house and in daily use at WIM and sister company ChargeMakers, on chargers of several makes. Do you run a charging network yourself? For charging companies
WIM keeps your chargers in view remotely with its own software, Fleet Ops, and fixes what can be fixed remotely. Via the QR sticker the driver can unlock, restart or report. A repair on site is done by your own installer.
No. WIM works remotely. For work on the charger or in the meter cupboard you need your own installer; you get the fault codes and their meaning from us.
Yes, Fleet Ops shows chargers of different makes in one place. A charger has to speak OCPP and be online.
No. WIM uses Fleet Ops itself, to watch your chargers remotely and fix what can be fixed remotely.
No, it is part of WIM Management.
€5 per charge point per month. Sign up online.
Sign up for Management ACTell us what you have and we will calculate the price for you.
Request an intake