Who fixes a charger fault, and what can be done remotely?
When your charger has a fault, the driver can use the QR sticker to unlock the cable, restart the charger or report a problem themselves. WIM sees faults remotely and resolves what it can from a distance, such as a restart or a settings check. Your own installer handles on-site repairs. Who you need depends on the problem.
Who does what when there is a fault?
As the owner, you deal with three parties. The driver is at the charger and can use self-help via the QR sticker. WIM monitors the charger remotely through the back office. Your own installer investigates and carries out any repairs needed on site.
The table below helps you decide where to start. Remote unlocking and restarting only work when the charger is online, and they cannot fix physical damage or a problem in the meter cupboard.
| Problem | The driver (QR sticker) | WIM remotely | Your installer |
|---|---|---|---|
| Cable stuck | Unlocks it themselves or reports a problem | Unlocks it on request, if the charger is online | If there is a physical cause |
| Charge card not recognised | Reports a problem | Checks the settings, including whether charge cards from other providers are switched on | If the charger is defective |
| Charger offline | Reports a problem | Sees that the charger is offline, but can only act once the connection is back | Checks the connection or power supply on site |
| Red light or error code | Restarts the charger if that option is shown, or reports a problem | Checks the fault and the settings; restarts the charger on request | If the cause cannot be fixed remotely |
| Circuit breaker or RCD tripped | Reports a problem | Cannot do anything in the meter cupboard | Checks the electrical installation |
| Physical damage | Reports a problem | Looks at the report | Investigates and repairs |
How monitoring with Fleet Ops works.
Where does the driver find the steps?
Point the driver to the sticker on the charger. Scanning it opens the page for that exact charger, without an app or account. This is explained in A fault? Scan the QR code on the charger.
For a stuck plug, there is My charging cable is stuck, what now?. If a session will not start, point them to Charging not working, what now?. For a warning light or error message, see Charger flashes red or shows an error. That way, the driver does not need you to pass on the steps.
What information helps WIM remotely?
A report made via the QR code is linked to the right charger straight away. Ask the driver to describe which socket they used, what the screen shows and what they have already tried. For a charging problem, the make and model of the car also help.
If you email info@wim.energy yourself, include the charger number, which is on the sticker. Also say whether it is a stuck cable, an error code, an offline charger or visible damage.
When do you call in your own installer?
On-site repairs need your own installer. That applies to physical damage and to any work on the electrical installation. Even after a remote check, an investigation or repair on site may still turn out to be necessary.
By WIM Energy B.V. · Updated