Help with a fault My account Nederlands

Charger flashes red or shows an error

A red light or error message usually means the charger is temporarily unavailable, for example because of a fault, a connection error or overheating. Wait a minute or two and try again. If the error persists, scan the QR code on the charger to restart it or report a problem.

What does a red light mean?

A red light or an error message on the screen can have several causes:

  • An internal fault: the charger has switched itself off for safety.
  • A connection error: the charger has temporarily lost its network connection.
  • Overheating: in very hot weather, the charger temporarily cuts the power.

What can you do yourself?

  1. Wait a moment and try again. Many errors are temporary. Wait 1 to 2 minutes and hold your charge card in front of the reader again. The charger often recovers on its own.
  2. Try the other socket. If the charger has two sockets and one shows an error, try the other one.
  3. Restart the charger using the QR code. Scan the QR code on the charger and choose Restart charger, if that option appears. After a quick check with your charge card, the charger restarts in about 30 seconds. Read more in A fault? Scan the QR code on the charger.
  4. Check your cable. Make sure the cable is firmly plugged in at both ends, in the charger and in your car. A loose connection can also cause an error.

Is the error still there?

Report a problem using the QR code on the charger. Your report then reaches us linked to the right charger. Briefly describe:

  • which socket you used (left or right);
  • what you see, for example a red light or an error message on the screen.

Prefer email? Send your report to info@wim.energy and include the charger number from the sticker.

By WIM Energy B.V. · Updated