Help with a fault My account Nederlands

Connecting your charger to WIM: a guide per brand

You connect your charger to WIM by entering WIM’s address in the charger: the OCPP URL. You do this in the manufacturer’s app or software. With most brands you can do it yourself. With Alfen and Easee it is even simpler: there you choose WIM Energy from a list. If it does not work out, your installer can do it for you. As soon as your charger connects, we see it come in and set up the rest.

What do you need?

  1. WIM’s OCPP URL. We email it to you, together with the guide for your brand as a PDF. Copy it from the email instead of typing it: one wrong character and the charger cannot find WIM.
  2. Your charger’s charger ID. This is the name your charger uses to report to WIM. With Wallbox and Peblar it is the serial number on the sticker. An Alfen already has a Charge point ID, at the bottom of the sticker on the box; you leave that as it is. Easee and Zaptec send it themselves. Send us the charger ID or the serial number, so we recognise your charger straight away.
  3. Access to the manufacturer’s app or software, with your charger’s account or password. If only your installer has that access, let your installer do the connecting.
  4. Internet on the charger, through a network cable, wifi or a SIM card. Read Do I need a SIM card in my charger?

Connect when no car is charging. With most brands the charger restarts at the end.

Guide per brand

  • Alfen: in the MyEve app you choose the back office WIM Energy. You can also use the ACE Service Installer on a Windows laptop.
  • Easee: in the Easee app you choose WIM Energy as the operator. There is no address to enter.
  • Zaptec: you enter the OCPP URL for your installation in the Zaptec Portal.
  • Peblar: on the charger’s own settings page.
  • Wallbox: in the myWallbox app, under the OCPP settings.

Another brand? The setting is usually called OCPP, Backoffice, Backend or Central System. Send the make and model to info@wim.energy and we will look it up for you.

Coming from another back office?

Cancel your current back office and download your session history first, because it stays with your old provider. As soon as you point the OCPP URL to WIM, the connection with your old back office stops, and so do the services that depend on it. The rest of the switch is explained in Switching to a different back office for your charger.

After connecting

  1. Your charger reports to WIM. Usually within a few minutes after the restart. We see it come in and add it to your account.
  2. We set up your rate and access, as agreed with you: who may charge and at what rate.
  3. You get a QR sticker for each charge point to put on the charger. Drivers can use it to unlock the cable, restart the charger or report a problem themselves.
  4. You charge. The sessions come in at WIM, and after your first charging month you receive your first settlement.

Charger not connecting?

Check these points:

  • Is the charger online? The manufacturer’s app usually shows whether it has a connection.
  • Is the URL right? Copy it from the email again and compare it character by character.
  • Is there a SIM card from your previous back office in it? Such a SIM card can be locked to other back offices. Then you need a different SIM card.

Still stuck? Email the make, model, serial number and a photo of the screen to info@wim.energy. We will take a look remotely.

By WIM Energy B.V. · Updated